Composite doors · Stoke-on-Trent & Staffordshire
Composite DoorInstallation AcrossStoke-on-Trent
A front door that closes with a solid thud, locks without lifting, keeps the hallway warm and still looks new in ten years: surveyed, fitted square, sealed properly and registered under a 10-year insurance backed guarantee.
Rated 5.0 from 99 Google reviews10-year insurance backed guarantee
Get a Free Quote
Assure certified
Installations independently checked against Building Regulations.
10-year IBG
Every installation covered by an insurance backed guarantee.
5.0 from 99 reviews
Verified Google reviews from customers across Staffordshire.
Family-run since 2019
Company No. 12220717, based in Stoke-on-Trent.
Free written quotation
Surveyed, priced in writing, with no obligation to proceed.
The service
The most-used moving part in your house deserves the strongest specification
A composite door is a solid-core slab (typically a dense insulating core within a reinforced frame, faced with a tough moulded skin) hung in a thermally efficient outer frame with multi-point locking. The construction is what separates it from a hollow uPVC panel door: there is no drum sound when you knock it, no flex under a shoulder, and no thin panel to be kicked through at the bottom rail.
It suits any household replacing a front, back or side entrance where security, insulation and appearance all matter at once. It is the obvious upgrade where a hallway is cold, where a 1990s panel door has warped, or where an older timber door needs repainting every couple of years and still does not close cleanly in wet weather.
The usual triggers are practical: draughts around the frame you can feel from the stairs, a lock that needs the door pulled in before the key will turn, daylight visible at the threshold, a swollen timber door that binds all winter, or a break-in on the street that has made everyone look at their own hardware.
Professional installation is what turns a good slab into a secure door. The frame must be packed and fixed into sound masonry at the hinge and keep positions, the keeps must be aligned so every hook and roller engages, the cylinder must be correctly sized so it does not protrude and invite snapping, and the threshold has to shed water. A strong door in a badly fitted frame is only as strong as its weakest fixing.
Who it is for
Homeowners replacing a tired front or back door, landlords upgrading entrance security, and anyone with a cold, draughty hallway or a door that no longer closes cleanly.
When it is needed
Warped or swollen doors, draughts at the frame or threshold, locks that need forcing, damaged or flexing panels, or a timber door on an endless repainting cycle.
What is included
Survey, measurement, supply of the door, frame, glazing and hardware, removal and disposal of the old door, fitting, sealing, alignment, testing and guarantee registration.
What happens if it waits
The weakest entrance sets the security of the whole house
Intruders do not test every opening; they look for the easiest one. A flexing panel door, a worn multi-point mechanism or a cylinder standing proud of the handle plate is exactly the invitation they are looking for, and most opportunist forced entries take seconds rather than minutes. The rest of the house being well secured makes no difference if the back door gives way.
There is a comfort cost too. Hallways are the coldest part of most Staffordshire homes because the front door is often the least insulated element in the envelope. Cold air at the threshold sinks and travels along the floor, which is why a hallway with a poor door feels colder than the thermostat suggests, and why the heating runs longer than it should.
The common mistake is buying a door on the slab specification alone and letting the cheapest fitter hang it. We are regularly called to doors where the keeps were never adjusted, so only one of five locking points actually engages; where the frame was foamed in with no fixings behind the hinges; or where an oversized cylinder protrudes far enough to be gripped and snapped. The door is fine. The installation is not.
A forced-entry weak point
Flexing panels, unaligned keeps and protruding cylinders turn an entrance into the easiest way into the property.
Cold air along the hallway floor
A poorly sealed threshold pours cold air into the circulation space, making the whole ground floor feel colder than it is.
Water damage at the threshold
Rain driven under a badly set threshold soaks the floor edge, lifts laminate and rots the timber beneath a doorway that gets daily traffic.
Insurance questions after a claim
Insurers expect entrance doors to lock properly. A mechanism that has not engaged for months is a conversation you do not want after a break-in.
Our process
Five stages to a door that locks first time, every time
Entrance doors are fitted to a fixed sequence because alignment, not appearance, is what determines whether the security actually works.
- STEP 1
Inspection
We check the existing frame, threshold, masonry and floor levels, and confirm the opening size and the swing that suits the hallway.
- STEP 2
Specification & written price
Colour, style, glazing, letterplate, handle set, hinges and cylinder are chosen and priced in a written, no-obligation quotation.
- STEP 3
Manufacture
The slab and frame are made to your survey dimensions and finish, with the hardware positions set for your chosen handle and lock arrangement.
- STEP 4
Installation & sealing
Old door out and away, new frame packed and mechanically fixed at hinge and keep positions, threshold bedded, perimeter sealed inside and out.
- STEP 5
Alignment, testing & guarantee
Hinges adjusted in three planes, every locking point tested through the full throw, keys handed over, and the 10-year insurance backed guarantee registered.
What you get
What a properly specified composite door gives you
Real resistance to forcing
A solid core within a reinforced frame does not flex. Combined with multi-point hooks and anti-snap cylinders, the whole assembly resists rather than one lock point.
A warmer hallway
An insulating core plus compression seals and a sealed threshold stops the cold draught that used to run along the hall floor all winter.
No repainting, ever
The moulded skin is coloured through and UV-stable. It is washed down, not sanded and repainted, and it does not swell or bind in wet weather.
Locking that engages first time
Correctly aligned keeps and adjustable hinges mean the handle lifts and the key turns without pulling the door towards you.
Weather stability year-round
The composite construction does not move with humidity, so the door that shuts easily in August still shuts easily in February.
Ten years of documented cover
Assure certified installation and a 10-year insurance backed guarantee, with the paperwork registered for you on completion.
In detail
Construction, security hardware, styles and glazing
Two composite doors that look similar in a brochure can be very different products. These are the details that decide how the door performs in use.
Slab construction and thermal core
A quality composite slab is built around a dense insulating core inside a reinforced timber or composite subframe, faced both sides with a thick moulded skin. That build is what delivers the solid feel, the resistance to impact and the thermal figure, and it is why the door does not drum or flex like a hollow panel.
The outer frame matters just as much. A multi-chambered thermally broken frame with compression seals stops the perimeter becoming the weak point, and reinforcement at the hinge and keep positions means the fixings pull into something solid rather than into plastic alone.
Security hardware specification
We fit multi-point locking with hooks, rollers and a deadbolt so the leaf is drawn tight to the frame at several points along its height. The keeps are adjusted after hanging, because a mechanism that engages at only one point offers a fraction of the resistance it was designed for.
Cylinders are specified to the correct length so they sit flush behind the handle plate, and we use anti-snap, anti-bump and anti-drill cylinders as standard practice. Hinges are adjustable in three planes so the closing action can be trimmed years later without removing the door.
Styles, colours and glazing options
Panel designs range from plain contemporary slabs with a slim vision panel through to traditional four-panel and cottage styles for period frontages. Colours are through-coloured skins (anthracite, black, blue, green, red, oak and other woodgrain effects) with matching or contrasting internal faces available.
Glazing is toughened safety glass as a critical location, with obscure, bevelled, leaded and decorative options for privacy on hallway and back doors. Matching side panels and top lights let a narrow hallway keep its natural light while the door itself stays solid.
Front, back and commercial entrances
Front doors are usually specified for appearance and security together. Back and utility doors take more knocks and more traffic, so a solid lower section, a mid-rail and obscure glazing above tend to be the sensible arrangement.
For rental and commercial entrances we look at cycle count and key control: heavier-duty hardware, and cylinders chosen so a landlord can rekey between tenancies without replacing the whole mechanism. Fire and escape requirements are checked at survey where the entrance serves flats or a workplace.
Recent work
Composite Door Installation we have completed locally
Common questions
Answers before
you commit
If your question is not here, call Anthony Jones on 01782 479526. A two-minute conversation usually settles it, and there is never any pressure to book.
How much does a composite door cost fitted?+
It depends on the size of the opening, the style and colour, the glazing, whether side panels are included and the hardware specification. We measure on site and give a written price covering the door, frame, fitting, removal of the old door and guarantee registration.
How long does it take to fit a composite door?+
A straightforward front or back door replacement is usually completed within a few hours. Openings that need altering, or sets with side panels and top lights, can take a full day.
Are composite doors more secure than uPVC panel doors?+
The solid core and reinforced frame resist impact far better than a hollow panel, and that only counts when the multi-point keeps are properly aligned and an anti-snap cylinder is fitted. We do both as standard.
Will a composite door make my hallway warmer?+
Yes, noticeably, if the current door is a draughty timber or thin panel door. The insulating core plus compression seals and a correctly bedded threshold removes the cold air that used to travel along the floor.
Do composite doors fade or need painting?+
They are through-coloured and UV-stable, so they are washed down rather than repainted. There is no annual sanding-and-painting cycle and no swelling in wet weather.
How long should a composite door last?+
The slab and frame should give many years of daily use. Hinges, cylinders, handles and seals are serviceable wearing parts, which is why we fit adjustable hardware that can be trimmed rather than replaced.
What guarantee comes with the installation?+
A 10-year insurance backed guarantee, with the installation completed under Assure certification. We register the paperwork for you.
Can you fit a door into an existing frame?+
We usually replace the frame with the door, because the frame is where the fixings, the seals and the keeps live. Fitting a new slab into an old, distorted frame undoes most of the benefit.
Can you help urgently if a door has been damaged?+
Call the office and tell us what has happened. We will advise on making the opening secure straight away and how quickly we can attend to replace it.
Which areas do you fit composite doors in?+
Stoke-on-Trent and across Staffordshire and Cheshire, including Newcastle-under-Lyme, Stone, Milton, Birches Head, Alsager, Crewe and Sandbach.
Related services
uPVC Windows & Doors Installations
Low-maintenance uPVC frames in a wide range of finishes, installed to keep heat in and draughts out.
Patio & French Doors
Smooth-running sliding and French door sets that open your home to the garden without losing security.
Glass Replacements
Broken, cracked or misted glass replaced quickly: toughened, obscure and specialist units supplied.
Window Installations & Replacement
Precision-measured replacement windows fitted to airtight tolerances, from single units to whole-house projects.
Areas we cover
Not sure we reach you? See every area we cover across Staffordshire and Cheshire, browse all window and door services, or contact us and we will tell you straight away.
Next step
Secure the entrance you use every day
Call or send the details and we will survey the opening, talk through styles and hardware honestly, and put one written price in front of you with the guarantee explained.
Assure certified · 10-year insurance backed guarantee · Rated 5.0 from 99 Google reviews